|
| |
ELECTROLYSIS BLEND METHOD :
With this method is possible to solve the definitive depilation problem, using this
scientific system of easy application.
| DEFINITIONS:
The blend method represents an undoubted
alternative of definitive depilation. The action of the Blend Method takes place in two
fundamental stages:
1- Emanation of current of discharge frequency
thermolysis with respective heating of the piliferous tissues, causing them to increase
their porosity making them more receptive to the sodium hydroxide absorption that is
generated in the second phase. 2- Emission of galvanic current
(electrolysis) that
induces the formation of an alkaline solution of sodium hydroxide which effect is
described as highly depilation action. |
| The thermolysis, additionally, produces an effect of
mitigating the sensation of pain. Lapsed approximately 2 seconds of beginning the
discharge of current of thermolysis, automatically the equipment begins to generate the
second current, that of the electrolysis.
At the first stage, one current discharge named
thermolysis,
which causes a heating of the piliferous tissues occasioning them a destructive
process.
These tissues become more porous and they are more available to absorb the alkaline
substance that generates the second current for effect of the chemical reaction
(the electrolysis.)
This second current is destined to produces the ionic
dissociation of the watery solution and the mineral salts present in the organic
tissues,
in order to generates the sodium hydroxide, (NaOH)The sodium hydroxide is absorbed for
the tissues, which suffer a total destruction. |
| THE
ELECTROLYSIS: It is described as the application of a galvanic current directly
in the hair root.
In order to achieve the discharge of a galvanic current into
hair root in the precise point, stainless steel thin needle (with protection the all their
longitude) are used. The needle is connected to the device to the negative polarity of the
galvanic current.
The needle is smoothly introduced inside the piliferous
follicle. This operation is totally painless.The circuit closes placing the electric
positive polarity in contact of any part of the patient skin to be treated. |
| The galvanic current goes into contact with the watery
solution and the mineral salts, specifically the sodium chloride, and originates the
properly called electrolysis reaction. |
|
The sodium hydroxide that is formed, is a caustic
chemical substance that has a destructive action into the hair root. |
| THE
THERMOLYSIS: It is a high frequency current discharged in the needlepoint
causing a quick increase from the temperature inside the follicle, occasioning the
destruction of the hair root. |
| The combined emission of these two currents makes of the electrolysis
blend method an effective tool in the definitive elimination of the superfluous
hairs. |
|
Contacto
Ubicación
HORA LOCAL:(LOCAL TIME)
Necesitas una
cuenta de correo?